MMHE-ATB Sdn. Bhd. MALAYSIA


MMHE-ATB SDN. BHD. MALAYSIA
MMHE-ATB Sdn. Bhd. is a joint venture between ATB Riva Calzoni (ATB RC) and Malaysia Marine & Heavy Engineering Sdn. Bhd. (MMHE), was set up in Malaysia in the year 2000, located inside of MMHE yard at Pasir Gudang, Johor and adjacent to Singapore Island.


Company

Company Company Zoom

The objective of the JV offer benefits to both the partners as well as the stakeholders by providing customers with a more and a higher quality of equipment arising from the combined business synergy and strengths of the two partners.

The main activity of the JV is to design and manufacture process equipment for the Oil & Gas, Petrochemical as well as Hydropower and Steel industries.

ATB RC with over 70 years of experience specialized in this area brings to the JV, its sophisticated engineering & design, procurement, manufacturing, installation & maintenance of various equipment for MMHE, a company that is active in the marine and heavy engineering industry and involved in a wide spectrum of oil and gas engineering construction.

MMHE is a subsidiary of Malaysia International Shipping Corporation Berhad (MISC), a global energy-focused Maritime Transportation and Logistics Company predominantly owned by PETRONAS, the well-known Malaysia National Oil Company.

Relying on the ATB RC manufacturing capability and know how, the JV concentrates to produce equipment in various industries below:

1. Oil & Gas and Petrochemical Industry: pressure vessels, heat exchangers, air fin coolers skids, etc.
2. Hydropower Plants: penstocks, valves, gates, etc. 
3. Upstream and Subsea area: skids process equipment, mid arch, manifold, etc.

The Joint venture is accredited with ISO 9001:2008, ISO 14001:2004, OHSAS 18001:2007 and U, U2, S, NB and R Stamps by ASME.

Facilities & Capabilities

MMHE-ATB occupies about 21 acres of land inside the MMHE premise at Pasir Gudang, Johor.
The company has its own engineering and design department and a fully-equipped workshop with a capacity of 500 MT fabrication per month.

Item Details
Covered Fabrication Area 11,000 m2
Total Fabrication Area 16,000 m2
Plate Rolling Capacity Up to 150 mm thickness
Rotators Up to 500 tons capacity
Cranes Capacity From 25 tons to 80 tons (Overhead & Gantry type)
Full set equipment Cutting, Welding, Clad overlay operations
Support from MMHE Workshop up to 50,000 m Cranes up to 400 Mt (crawler)

Click on the buttons to get a full details of facilities.

FABRICATION SHOP 1 & 2

FABRICATION SHOP 1 & 2

Item Details
Size 25 m wide x 250 m long  x 11.5 m height
Type of Floor / Area Covered 6,250 sqm
Overhead Cranes 2 units of 25 tons capacity
Clearance from  Crane Hook 8.0 m
Concrete floor  bearing capacity 20 tons / Sqm

FABRICATION SHOP 3

FABRICATION SHOP 3

Item Details
Size 15 m wide x 60 m long x 8 m height
Type of Floor / Area Covered 900 sqm
Overhead Cranes 1 unit of 5 tons capacity
Clearance from  Crane Hook 5.0 m
Concrete floor  bearing capacity 20 tons / Sqm

FABRICATION SHOP 4

FABRICATION SHOP 4

Item Details
Size 30 m wide x 100 m long x 22 m height
Type of Floor / Area Covered 3000 sqm / Open floor 6000 sqm
Overhead Cranes 1 unit of 20 tons capacity
Gantry Crane 1 unit of 80 tons capacity
Clearance from
Crane Hook
16 M for overhead
12.5 M for Gantry
Concrete floor bearing capacity 20 tons / Sq.m

PAINTING & BLASTING WORKSHOP

PAINTING & BLASTING WORKSHOP

Item Details
Size 45m wide x 250m long
Type of Floor / Area Open / 11,250 sq.m

MATERIAL LAY YARD AREA

MATERIAL LAY YARD AREA

Item Details
Size 25 m wide x 100 m long
Type of Floor / Area Open / 2,500 sqm

IN-HOUSE CAPABILITIES

Details
Engineering and Design
Welding
Heat Treatment
NDT

Product Range

Consolidated products range is part of MMHE ATB’s experience list and directly handled by the JV since year 2000.

Material
Carbon steel material, cladding, stainless steel
(up to 100 mm thickness and 250 tons)


Reactors & Separators
Columns & Towers
Pressure Vessels
Storage Tanks
Shell & Tube Heat Exchangers
(low pressure)
Process Skids & Packages
Malaysia products
Pig Launcher & Receiver
Subsea Structures
Pipe Racks
Rollers Pipes for Offshore Structure
Gates (Hydropower, Dry Dock)

Designed in Italy and fabricated in Malaysia under the supervision of ATB Riva Calzoni.

Material
Carbon steel, cladding, stainless steel, low alloy
(up to 100 mm thickness and 500 tons)


Low Alloy Reactors
Large Diameter Columns & Towers
Italy and Malaysia products
Process Separators
Storage Bullets (up to 900 MT)

References

Click on the project to get a details of MMHE-ATB project.


Main Clients


587.jpg
589.jpg
588.jpg
577.jpg
591.jpg
578.jpg
592.jpg
581.jpg
576.jpg
579.jpg
580.jpg
582.jpg
583.jpg
584.jpg
585.jpg
586.jpg
590.jpg
593.jpg

Video